On 2 October 2017, LIMOV completed the erection of LRT Musi Bridge in Palembang. It is the most difficult part in the LRT Palembang project because the bridge erection was all done over the busy Musi River. The LRT Musi Bridge location is alongside the historical Ampera Bridge, one of the most iconic bridge in …
LIMOV designed and managed one of the most sophisticated lifting process in LRT Musi Bridge. One of the span is near Pasar 16 Ilir Palembang, one of the oldest and most crowded traditional market in South Sumatra. Due to social and historical issue, the market area cannot be cleared for crawler cranes. We prepared a …
LIMOV is commissioned by PT Waskita Karya (Persero) Tbk. to provide Construction Engineering Service (CES) for Form Traveller in Becakayu Cawang Flyover. The flyover is balanced-cantilever type and cross above the existing Cawang-Tanjung Priok Toll Road (Wiyoto Wiyono). It is one of the most critical and complex bridge construction due to the challenges. LIMOV scope …
LIMOV delivers four sets of LIMOV SBA-50T Spreader Bars to Schneider Electric Indonesia in cooperation with PT MIR Engineering. MIR is the inspection company that works together with LIMOV to do load test and inspection (MPI and ultrasonic) on the Spreaders. The Spreader Bar will be used for lifting of Schneider skid package.
LIMOV completed the Engineering Design and Construction of Form Traveller for ATJ Cable-stayed Bridge in East Kalimantan. The main contractor is PT Waskita Karya (Persero) Tbk. LIMOV is the first company in the world to design the Hybrid Form Traveler used in this project. Usually, Form Traveller for Cable-stayed Bridge is either underhung or overhead …
We just completed the design and construction supervision for “Kuda Laut” Bulk Carrier Barge in Sijenjang, Jambi. It was specially designed with reinforced deck to withstand heavy load from excavator working inside her Sideboard.
LIMOV just delivered design and structural analysis of Casing Clamp to PT Kris Setiabudi Utama (KSU). The Casing Clamp will be used to lift drilling casing.
On 27 July 2008, LIMOV delivers the customized LIMOV Semeru 35T to PT Satoil Oilfield Service in Taman Tekno BSD. Semeru 35T is a Gantry-type Pull Test Machine specially designed for vertical lifting test of Offshore Container in accordance with DNV 2.7-1 Standard. Unlike ordinary gantry crane, Semeru 35T uses symmetrical hydraulic boom for lifting …
LIMOV delivered Mahakam 50T to PT Satoil Oilfield Service. Mahakam 50T is horizontal sling pull test machine with SWL of 50000 kg. It is designed and built according to SATOIL requirement to load test sling in accordance with DNV 2.22 standard.
LIMOV delivers engineering design of Coal Transhipment System to PT Indo Straits Tbk. Indo Straits is a marine logistic provider in Indonesia. The Coal Transhipment system is designed to moor alongside 100,000 DWT Mother Vessel about 5 kilometers away from the Sebuku island coast. It is then discharge coal cargo in the 300 feet barge …